Fine appearance,Selection of raw material,Performance is remarkable,Intelligent operation, strong capacity, non - standard customization;
The opration is simple,imported high quality tool steels,in padicular,durable,The crusher makes use of the relative motion between the movable and fixed gear disks at high speed, so that the crushed material can be crushed by the impact of the teeth, shearing and friction, and the collision between the materials. The machine has simple structure, smooth operation, low noise and good crushing effect. The crushed materials are discharged directly from the crushing chamber. Particle size, can be selected by different aperture screen to achieve.
1). The whole machine is designed according to GMP standard and made of stainless steel.
2). This machine has the advantages of simple structure, high energy and low consumption, easy cleaning, and is an ideal crushing equipment at present.
3). Water cooling jacket can be loaded to meet the crushing requirements slightly lower than normal temperature.
4). Large and small sizes are complete.
5). Design the internal motor to reduce the center of gravity of the machine and effectively reduce the noise of the equipment.
Products use semi-automatic working principle, simple, labor saving, liberation of manpower, manufacturers direct sales, reliable quality.
High yield, low energy consumption,Convenient installation, quick maintenance, crusher maintenance and replacement of vulnerable parts become more rapid and convenient, shorten the maintenance time.
Attention to the operation of plastic shredder
(1), plastic grinder and power unit to install firmly. If need plastic crusher long-term fixed operation, should be fixed on the cement foundation; If plastic crusher flow operation is needed, the unit should be installed on the frame made of Angle iron, and ensure that the power machine (diesel engine or motor) and plastic crusher pulley groove in the same rotary plane.
(2), after the installation of the plastic crusher to check the fasteners of each department, if there is loose to tighten. Also check the belt tightness is appropriate.
(3), before the plastic crusher starts, first turn the rotor with your hand, check whether the operation of claw, hammer piece and rotor is flexible and reliable, whether there is collision in the crushing room, whether the rotation direction of the rotor is consistent with the direction indicated by the arrow of the machine, whether the lubrication of the power machine and plastic crusher is good.
(4), do not casually replace the belt pulley, in case the speed is too high to cause explosion in the crushing chamber, or the speed is too low to affect the working efficiency of the crusher.
(5). After starting the plastic shredder, it shall keep idling for 2~3min, and feed after no abnormal phenomenon.
(6), in the work must pay attention to the operation of the plastic grinder, first of all, feed uniform, in order to prevent blocking the crushing room; Second, don't work too much for too long. In case of vibration, noise, excessive temperature of bearing and body, spraying materials to the outside, etc., stop the machine immediately for inspection and troubleshooting before continuing the work.