After the broken plastic enters the drum, on the one hand, it is screened as the drum rotates, on the other hand, the plastic with large particle size flows forward along the slope of the drum and is gradually screened out through the screen mesh of different mesh.Small pieces of plastic are sifted out and dropped into their own funnels, which are then transported out manually or by gravity to the finished pile.
1, all the load bearing for machine, so good lubrication for the bearing life has a great relationship, it directly affects the service life of machine and availability, and requirements into lubricating oil must be clean and seal must be good, the machine's main oil (1) the rotation bearing (2) roll bearing (3) all the gear bearing, sliding plane (4) activities.
2. The newly installed hoop is easy to loose and must be checked frequently.
3. Pay attention to whether all parts of the machine work normally.
4, pay attention to check the wear degree of easy wear parts, pay attention to replace the worn parts at any time.
5, put the chassis plane of the movable device, should be out of dust and other things to avoid the machine can not be broken when the movable bearing can not move on the chassis, resulting in serious accidents.
6. If the temperature of bearing oil rises, it should stop immediately to check the reason to eliminate it.
7, rotating gear in operation if there is impact sound should immediately stop the inspection, and eliminate the small plastic screen out after falling into their funnel, and then transported out by manual or gravity flow to the finished product pile.