Maintenance and repair of pulverizer machinery
(1) the tool is used for a long time, inevitably lose the sharpness, must remove the edge grinding, so as to avoid the deterioration of the operating conditions of the machine.
(2) two bearings at both ends of the spindle are equipped with lubricating oil nozzles, which should be refueled regularly
(3) after the use of a considerable time triangle belt will be elongated, should adjust its center distance, not to reduce the transmission power
(4) when the broken material is a film and other frivolous materials, occasionally encounter infarction in the middle of the broken room, can open the broken room door, with a small stick to the bottom of the room can be stirred, must not hand room bottom, so as to avoid accidents.
Method of use
Connect to the power, before starting up the inertia wheel with the hand to observe whether there is a foreign body in the machine, and then start up the empty operation for about 20 minutes, to pay attention to the active knife steering is clockwise, if not clockwise rotation, should change the motor steering, such as normal, can be feeding processing
Performance characteristics of powerful pulverizer
1, environmental protection and power-saving particle crushing (3-5mm) uniform, no dust, low noise (70-80 db), the use of time relay configuration, effective machine operation and stop perfect combination.
2. Excellent cutting tools are imported skd-11, smelted by electric furnace and remelted by electroslag, with high purity, good toughness and high temperature resistance.
3, overload protection motor with overload protection device, and a power chain protection system, reliable operation.