Scope of application:
Suitable for: PE,PP,PET,PVC, mineral water bottle, beverage bottle,PET bottle brick, trademark paper separation, etc
Product advantages:
1. Long life: the blade and cylinder wall of this stripper are made of 10mm thick material, which can extend the life of stripper for 3-4 years (most stripper wall thickness in the market is between 4-6mm);
2, low loss: in the case of no impact on the stripping rate and output unchanged, our company will drop the speed of the stripping machine, so that the broken rate of the bottle nozzle to a low (market many short and cheap stripping machine with high speed to make up for the lack of stripping, resulting in very high loss);
3, separation rate: the use of a new folding type suction separator, to solve the market up and down the rain can not work, and removable, maintenance is very convenient, separation rate is up to 99%, and the separated label paper does not contain bottle cap, broken bottles, a small number of bottle rings;
4, detachable: the stripper cylinder adopts the opposite side of the door, changing the installation of the knife is no dead Angle, and the wall blade is a whole body, remove and install just drop the whole screw can remove the whole knife plate (many unreasonable design stripper is difficult to remove the blade);