Plastic shredder, can crush any nature of plastic products, pipes.
(1).Wide application, can be broken, recycling of various materials, shapes of plastic products；
(2).Mature processing technology, box, tool rest and other important parts of the overall processing, to ensure the degree of coordination；
(3).Reasonable structure, convenient operation, energy-saving and durable, practical and economical；
(4).Equipped with a number of safety protection devices to ensure safe operation；
(5).Double layer design of hopper reduces noise.
Plastic crusher is mainly used to break all kinds of thermoplastic, such as plastic profile. Granule can be used for extrusion and injection molding. With the characteristics of large crushing capacity and stable working performance, it can be equipped with various models according to the needs of users.
How it works：
After the crusher foot is fixed, do not remove the parts, according to the requirements of the motor to connect the power and grounding and attention to the direction of rotation (according to the arrow direction) can be used. When using, open the power box, open the main switch of the power supply, the red light, cover the power box, open the fan and crusher, because the new machine is more precise in every aspect, start to use the better start and stop, as far as possible to reduce the full load. When finished, the crusher must be turned off, and the fan must be kept running for one minute to ensure that the conveying pipeline is clean. If the items in plastic and color, the upper and lower casing connection screws open on the chassis, the crusher pipeline flange screw screw out on both ends of the foot, foot stuffy cover screw out at the same time, pull the conveyor into the hopper, and under the casing boring plate remove the bolt screw out four up screen, clean after mount tighten all bolts, at the same time two discharge tube oblique mouth with your hand at the end of the material can be cleared. Pipes and collectors need not be removed. In order to improve efficiency and service life, attention should be paid to belt tightness. Bearing butter should be replaced every 500 hours. Unit maintenance and cleaning and knife grinding must turn off the main power switch.
Sharpening: the blade can be sharpened by hand and grinding machine after removing the fixed blade. Rotating knife need not be removed, can be used to hand grinding wheel or angular grinding machine edge grinding edge (see schematic diagram). In case of a small gap, can be used to polish the gap straight in the outward grinding sharp, like the carpenter can be used.
Scope of application：
Widely used in waste plastics,ton bag, film and other solid waste, let the limited resources infinite circulation.