Proper use of the grinder
1. Crusher and power unit should be installed firmly.If the grinder is fixed for a long time, it should be fixed on the cement basis;If the grinder is a mobile operation, the machine set should be installed on the frame made of Angle iron, and ensure that the power machine (diesel engine or motor) and the pulley groove of the grinder are in the same rotary plane.
2, after the installation of the grinder to check the fastening of each part of the fastener, if there is loose to tighten.Also check the tightness of the belt.
3. Before starting the crusher, rotate the rotor by hand to check whether the tooth claw, hammer and rotor are flexible and reliable, whether there is any collision in the shell, whether the rotation direction of the rotor is consistent with the direction indicated by the arrow of the machine, and whether the lubrication of the power machine and the crusher is good.
4, do not replace the belt pulley casually, in case the crushing room is too high speed to produce an explosion, or the speed is too low to affect the work efficiency of the grinder.
5. The crusher should idle for 2~3 minutes after starting, and feed after there is no abnormal phenomenon.
6, the work should always pay attention to the operation of the grinder, feeding should be uniform, in order to prevent blocking stuffy car, do not work overload for a long time.If vibration, noise, temperature of bearing and body is too high, and material is sprayed outwards, etc., the machine should be stopped for inspection. After troubleshooting, the machine can continue to work.