Operating rules of crusher:
1) turn on the power.
2) press the green button to start the crusher.
3) put the inspected plastic into the blanking port by hand.
4) monitor the operation of the machine nearby.
5) after the material is broken, press the red button to stop the machine.
2.Working procedures of crusher:
1) the spout entering the crushing room is separated from the waste or plastic parts according to the type and color of the glue, and the plastic materials should not contain metal or similar hard objects.
So as not to damage the shredder.
2) check whether the machine operates normally before starting.
3) wear masks, earplugs, protective glasses and other protective equipment.
4) use air gun to clean up the dust and remaining plastic materials in the crusher.
5) turn on the power.
6) press the start button to start the crusher.
7) slowly put the plastic to be broken into the shredder, not the whole box.
8) monitor the operation of the machine nearby (if any abnormal sound is found, press the red button immediately to stop the machine, turn off the power supply, check the cause, and restart the machine after troubleshooting).
9) please do not feed 5 minutes before stopping. Press the red button to stop the machine after crushing and unloading the remaining materials in the shredder room.
10) turn off the power.
11) clean the machine