Rpet Plastic

Rpet Plastic

1.New type crushing and cleaning machine (customized processing according to customer requirements) This equipment is mainly used for crushing waste agricultural film, PP woven cloth bag, etc. Its characteristics are water crushing, water washing transportation, energy saving and high...
Chat Now

Product Details

1.New type crushing and cleaning machine (customized processing according to customer requirements)

This equipment is mainly used for crushing waste agricultural film, PP woven cloth bag, etc. Its characteristics are water crushing, water washing transportation, energy saving and high efficiency. Waste plastic crushing and washing machine, plastic machinery. This machine is a closed design for crushing and cleaning, the crushing and cleaning is carried out synchronously after feeding the raw materials, and the washing cylinder is used for secondary cleaning, so that the cleanliness of plastic reaches the highest level.

The box body of this machine is all welded with thickened steel plate, the driving part is all finely processed, the blades are all made of high-quality steel, and after heat treatment, the high-quality mechanical quality makes it have the characteristics of high crushing efficiency, low energy consumption and long service life.

From the selection, purchase, installation, commissioning and after-sales maintenance, we will provide you with quality one-stop service, really for you to avoid future worries.

Structure, working principle, use method and matters needing attention:

After the crusher foot is fixed, do not remove the parts, according to the requirements of the motor to connect the power and grounding and attention to the direction of rotation (according to the arrow direction) can be used. When using, open the power box, turn on the main power switch, the red light, cover the power box cover, turn on the fan and crusher, because the new machine is relatively precise in all aspects, the best start and stop to reduce the full load as far as possible. When finished, the crusher must be turned off, and the fan must be kept running for one minute to ensure that the conveying pipeline is clean. If the items in plastic and color, the upper and lower casing connection screws open on the chassis, the crusher pipeline flange screw screw out on both ends of the foot, foot stuffy cover screw out at the same time, pull the conveyor into the hopper, and under the casing boring plate remove the bolt screw out four up screen, clean after mount tighten all bolts, at the same time two discharge tube oblique mouth with your hand at the end of the material can be cleared. Pipes and collectors need not be removed. In order to improve efficiency and service life, attention should be paid to belt tightness. Bearing butter should be replaced every 500 hours. Unit maintenance and cleaning and knife grinding must turn off the main power switch.

Sharpening: the blade can be sharpened by hand and grinding machine after removing the fixed blade. Rotating knife need not be removed, can be used to hand grinding wheel or angular grinding machine edge grinding edge (see schematic diagram). In case of a small gap, can be used to polish the gap straight in the outward grinding sharp, like the carpenter can be used.

2.Characteristics of the equipment

1): thick and heavy moving knife, high crushing power, the tools are cast with alloy tool steel and wear-resisting die steel, strong and long service life.

2): thick frame plate, can resist high torque, very strong.

3): set up start, stop, reverse and overload automatic reverse control function.

4): the equipment has the characteristics of low rotation speed, large torque, low noise and dust which can meet the environmental protection standards.

5): easy to adjust, low maintenance cost, economical and durable.

6): the thickness of the tool and the number of claws can be changed according to different materials.

1. Install the rotary knife horizontally. 2. Fix the fixed knife crosswise, it's better to install it to turn, the fixed knife turns with hand with slight friction sound. 3. Install all the rest of the rotary knives with friction sound. 4. 5. Exit the fixed knife, tighten the fixed knife bolt according to the requirements of fixed blade and rotary knife clearance. 6. Install the fixed knife on the opposite side, and the gap should be equal to that on the opposite side. Just tighten the bolt. Clearance of fixed and rotary knives: the clearance of broken general hardness blocks is about 3mm, the clearance of broken comprehensive plastic products is about 1.5mm, and the clearance of special materials is about 1mm.


Hot Tags: rpet plastic, China, manufacturers, suppliers, factory, wholesale, discount, buy, cheap, price, for sale

Inquiry

You Might Also Like