Strong PC series plastic crusher
This PC type crusher/crushing/grinder/shredder/cutter machine used for crushing all kinds of hard plastic, such as plastic bottles, containers, pellets plastic, sheets, packing strap, plastic buckets, plastic desk, plastic table ends from injection molding machines and extruder, etc. Have a good effect.
Strong PC series plastic crusher features
1. the machine adopts high hardness steel template,so it very soild and durable.
2. shaft made of special material processing,not easy deformed.
3. Feeding hopper,cutter and filter can be separated with easy opening and cleaning
Strong PC series plastic crusher method of use
1. The plastic crusher and power unit shall be installed firmly.If the plastic crusher is required to be fixed for a long time, it should be fixed on a cement basis.
2, after the installation of the plastic grinder to check the fastening of each part of the fastener, if there is loose to tighten.Also check the tightness of the belt.
3. Before starting the plastic crusher, first turn the rotor by hand to check whether the tooth claw, hammer t and rotor are flexible and reliable, whether there is collision in the crushing room, whether the rotation direction of the rotor is consistent with the direction indicated by the arrow of the machine, and whether the lubrication of the power machine and the plastic crusher is good
4. After starting, the plastic grinder should be kept idling first, and then feeding after there is no abnormal phenomenon.
5, pay attention to the operation of the plastic grinder at any time in the work, first of all, feeding should be uniform, to prevent blocking the crushing room;Second, don't overwork for too long.In case of vibration, noise, excessive temperature of bearing and body, and material spraying, the machine should be stopped immediately for inspection, and the machine can continue to work after troubleshooting.