Waste plastic bottle PET beverage bottle stripper
1, check whether the particle size of the broken products meet the requirements.If there are too many particles over the specified size, the reasons should be found out (such as the gap of the screen is too large, the discharge mouth is too wide, the hammer is worn, etc.), and appropriate measures should be taken to eliminate them.
2, crusher stop, to check whether the fastening bolt is firm, easy to wear parts of the degree of wear.In the case of a tooth crusher, a stop should be used to remove the wood between the teeth.
3. Worn parts should be replaced or repaired in time.
4, the crusher safety device, to maintain a good state, never to save trouble, and make the
PET bottle stripper
It is composed of two parts: one stripper link, which is composed of stripper cylinder spindle, moving knife on the shaft and fixed knife on the cylinder wall, and all of which use hard alloy tip. The label is removed by contact between moving knife and fixed knife in the process of mechanical propulsion.The two separation links are mainly composed of the main fan and auxiliary motor of the separation box. The separation efficiency is high and energy saving (no need for water) through the wind power, which is convenient and easy for the daily maintenance of the machine. The stripping rate is up to 98%