Heavy hammer crusher

- Jan 28, 2020-

Main working parts of hammer crusher:

A rotor with a hammer (also known as a hammer head).The rotor consists of a spindle, a disk, a pin and a hammer.The motor drives the rotor to rotate at high speed in the crushing chamber.The material is fed into the machine from the upper feeding port, and is crushed by the impact, impact, shear and grinding action of the high speed moving hammer.In the lower part of the rotor, a sieve plate is provided, and the grains smaller than the size of the sieve hole in the crushing materials are discharged through the sieve plate, while the coarse grains larger than the size of the sieve hole are kept on the sieve plate and continue to be hit and ground by the hammer, and then discharged out of the machine through the sieve plate.Hammer crusher is suitable for crushing minerals of various brittle materials.The crushed materials are coal, salt, white Asia, gypsum, alum, brick, tile, limestone, etc.The compressive strength of hammer crusher materials shall not exceed 100 mpa and the humidity shall not exceed 15%.It can be used as the crushing equipment of stone crushing, stone crushing, mine crushing, plastic crushing, garbage crushing and other materials.At present, hammer crusher is divided into two types: heavy and light. Ring hammer coal crusher (light hammer crusher) is suitable for crushing mohs hardness materials.Ring hammer crusher (heavy hammer crusher) is suitable for crushing brittle materials under mohs hardness.Because the mass of crushed stone ring hammer is greater than that of pulverized coal ring hammer, the impact force of the ring hammer can be increased to achieve the purpose of crushing ore.