Move lift belt conveyor

- Dec 10, 2019-


  • Nylon conveyor belt maintenance and maintenance


1, transport tape in the transport and storage, should be kept clean to avoid direct sunlight or rain and snow immersion, prevent acid, alkali, oil, organic solvents and other substances in contact, and away from the heating device more than one meter.

2. During storage, the warehouse temperature should be maintained between 18-40℃, and the relative humidity should be maintained between 50-80%.

3. During storage, the product shall be placed in rolls and shall not be folded. During storage, the product shall be turned once a quarter.

4. Conveyor belts of different types and levels of specifications should not be connected together, and their joints should best be bonded.

5. The type, structure, specifications and layers of conveying tape should be selected reasonably according to the conditions of use.

6. The belt running speed should not be more than 2.5 m/s, and the materials with large lumpiness and abrasion and the unloading device with fixed pear should use low speed as far as possible.

7. The relation between the diameter of the driving drum and the layer of the conveyor belt, the matching of the driving drum and the changing drum, and the requirements for the roller groove Angle should be reasonably selected according to the design regulations of the transport plane.

8. The feeding direction should be in line with the belt's running direction. In order to reduce the impact of falling materials on the belt, chute should be adopted to reduce the falling distance of materials.The belt receiving section should shorten the distance between idlers and use buffer idlers for leaking materials. The belt should adopt a soft and appropriate baffle plate to avoid overhardness of the baffle plate and scrape the belt surface of the conveyor belt.

9. The conveyor belt shall pay attention to the following matters in use: avoid the idlers being covered by materials, resulting in rotary failure, prevent material leakage stuck between the roller and the belt, pay attention to the lubrication of the moving part, but not oil transmission belt;Avoid starting with load;(3) the belt deviation, take measures to correct the application;(4) found the rubber belt partial damage of the application of rayon repair, so as not to expand;