All-purpose Domestic Shredder

- Jul 12, 2019-

1.High speed universal crusher application

  High speed universal crusher is suitable for pharmaceutical, chemical, metallurgical, food, construction and other industries. Hard hard materials for processing, including plastic, copper wire, Chinese herbal medicine, rubber and other crushing, can also be used as a micro crusher, ultrafine crusher processing process before the supporting equipment. Its powder collecting chamber adopts a completely closed silencing structure, which can effectively reduce the working noise. A cooling device is installed in the machine to lower the temperature and work more smoothly. The motor speed of the machine is 5000 RPM. This machine is made of Icr18Ni9Ti stainless steel material, which has strong characteristics of wear resistance and corrosion resistance, suitable for processing advanced and corrosive materials. This machine adopts the impact crushing method, after the material enters the crushing chamber, it is impacted by six moving hammers with high speed rotation, and smashed by mutual impact between gear ring and material. The crushed material enters the powder bag through the sieve hole with the help of airflow, leaving no residue. It has the advantages of high efficiency, low noise, reliable working performance and product quality, safe operation, drug hygiene and low loss.

2.Features introduced

  This machine is simple in structure, strong, smooth in operation and good in crushing effect. The crushed objects can be directly discharged from the grinding cavity of the main machine. The inner wall of the machine shell is completely machined to achieve smooth surface, which changes the rough inner wall and powder accumulation phenomenon of previous models, and makes the production of medicine, food and chemical industry more in line with the national standard and meet the requirements of GMP.

3.Technical parameters

Spindle speed: 7000 RPM;

Working noise: <85 db;

Grinding fineness: 10-120 mesh;

Feeding limit: 5×5×5 mm;

Yield: 5-20 kg/hour;

Power: 1.1 KW / 380 v;

Exterior size: 540×380×820mm;

Weight: 75 kg;

This series of machines has the following characteristics

1), the motion system of the machine one-way high-speed continuous rotation, high-speed rotation movement from the motor → belt drive → moving disc, using a single belt rotation, high-speed rotation has a smooth transmission.

2). The front cover of the machine must be opened after stopping the machine to facilitate the cleaning of the machine's inner cavity and ensure the cleanliness of the machine's working face.

3). Crushed materials can be discharged directly in the belly of the machine.

4), grinding degree of thickness can be achieved through different aperture screen.

4.Installation and debugging

1). After the machine is in place, it must be placed smoothly and fixed with anchor screw.

2). Clean the inner cavity of the machine before the test run, and lock the front cover with star handle.

3). After the power is switched on, please pay attention to the sequence and make the spindle rotate in the direction shown.

4), the test should pay attention to whether the machine is abnormal noise, so as to stop the inspection in time.

5). Install the storage bag in the discharge hopper.

5.Operation and precautions

1). Before use, check whether all fasteners are tightened and the belt is tensioned.

2). The running direction of the main shaft must follow the direction of the arrow shown on the protective cover, otherwise it will damage the machine and may cause personal injury.

3), check whether the electrical appliances are complete.

4), check whether the machine crushing room metal and other hard sundries, otherwise it will break the tool, affect the operation of the machine.

5), the material must be checked before crushing purity, do not allow the inclusion of hard metal debris, so as to avoid damage to the tool or cause burning accidents.

6). The oil cup on the machine shall be regularly injected with lubricating oil to ensure the normal operation of the machine.

7). Stop feeding before stopping the machine. If the machine does not continue to use, clear the leftovers in the machine.

8), regularly check whether the same screen is damaged, if damaged, should be replaced immediately.

9). Slight vibration will occur when using the machine. Tighten the lid connection handle to avoid accidents.