1. Product introduction:
The screw feeder is a new generation product which integrates steady-flow transportation, weighing measurement and quantitative control of powder materials;
2. Use and maintenance:
If the feeder is used for proportioning and quantitative feeding, in order to ensure the uniformity and stability of feeding and prevent material flow, it should be installed horizontally. If the general material is continuously fed, it can be installed at a downward slope of 10 degrees. For viscous materials and materials with high moisture content, the installation can be tilted down by 15 degrees.
B. After installation, the feeder should have 20 mm moving clearance, horizontal and flexible connection for suspension device.
C. Before aerial test, all bolts should be strengthened once, especially the vibration electromagnetic anchor bolts. They should run continuously for 3-5 hours and be re-tightened once.
D. During the test run, the two vibration motors must be rotated.
High production capacity, large crushing ratio, low power consumption, product size uniformity, simple mechanical structure, compact and light, less investment cost, convenient management.
4.(1). All-steel welding frame, strong and durable.
(2). Coarse spindle, high machining accuracy, smooth operation and long service life.
(3), imported chromium steel double-edged cutter, sharp blade, can be used in another head, durable.
(4). Optimized design of tool holder, spiral distribution of claw tool holder, which can disperse the force of crushing materials, reduce the impact force of crushing materials, and increase the crushing shear force of each knife.
(5), easy to remove the design is easy to repair and clean, and has a double structure, equipped with sound insulation materials, the noise is very low.
(6). Equipped with motor overload and power interlock protection system to ensure safe operation.
(7), suitable for crushing thick materials, hard material blocks, materials and other kinds of plastic objects.
(8). Optional accessories (1. Suction bucket; 2. Automatic blowing system.