Automatic Screw Conveyor Feeder / Powder Flexible Screw Auger Conveyor

Automatic Screw Conveyor Feeder / Powder Flexible Screw Auger Conveyor

Product introduction:
It is suitable for horizontal or inclined transportation of powder, granular and small bulk materials, such as coal mine, ash, slag, cement, grain, etc. The material temperature is less than 200 C. It is not suitable for transporting deteriorating, viscous and caking materials.
Chat Now

Product Details

Our eternal pursuits are the attitude of 'regard the market, regard the custom, regard the science' and the theory of 'quality the basic, belief the very first and management the advanced' for Stripping Cleaning Broken Separator, pet bottle scrap recycling, PET Bottle Strip Stripper. Our company has maintained a good upward trend, and we have a complete sales and wholesale system. We have 8 years experience of production and 5 years experience in trading with the customers all over the world. Adhering to the business philosophy of 'integrity cooperation', our company is committed to standing on the same front with customers, sharing win-win situation with customers and being the best quality supplier and the most professional manufacturer.

1. Product introduction: 

The screw feeder is a new generation product which integrates steady-flow transportation, weighing measurement and quantitative control of powder materials; it is suitable for continuous measurement and proportioning of powder materials in various industrial production environments; it adopts many advanced technologies with reliable operation and high control accuracy; it is especially suitable for continuous measurement and matching of powder materials in building materials, metallurgy, power and chemical industries. Material. Spiral feeder is widely used in various industries, such as building materials, chemical industry, electric power, metallurgy, coal mine carbon, grain and other industries. It is suitable for horizontal or inclined transportation of powder, granular and small bulk materials, such as coal mine, ash, slag, cement, grain, etc. The material temperature is less than 200 C. It is not suitable for transporting deteriorating, viscous and caking materials.


2. Working Principle: 

The screw feeder detects the weight of the material passing through the weighing bridge to determine the weight of the material on the tape. The digital speed sensor installed at the tail of the screw feeder continuously measures the speed of the feeder. The pulse output of the speed sensor is proportional to the speed of the feeder, and the speed signal and the weight signal are sent to the feeder controller together. The processor processes and generates and displays cumulative/instantaneous traffic. The flow rate is compared with the set flow rate. The output signal of the control instrument controls the frequency converter to change the driving speed of the feeder, so that the flow rate of the material on the feeder changes, approaching and maintaining the set flow rate, thus realizing the requirement of quantitative feeding.


3. Use and maintenance:

If the feeder is used for proportioning and quantitative feeding, in order to ensure the uniformity and stability of feeding and prevent material flow, it should be installed horizontally. If the general material is continuously fed, it can be installed at a downward slope of 10 degrees. For viscous materials and materials with high moisture content, the installation can be tilted down by 15 degrees.

B. After installation, the feeder should have 20 mm moving clearance, horizontal and flexible connection for suspension device.

C. Before aerial test, all bolts should be strengthened once, especially the vibration electromagnetic anchor bolts. They should run continuously for 3-5 hours and be re-tightened once.

D. During the test run, the two vibration motors must be rotated.

E. When feeding, the stability of amplitude, current and noise should be checked regularly during operation, and the abnormal should be stopped in time to deal with.

F. Lubricating oil should be added once every 2 months for AMB, and once a month for high temperature season.

We always take the customer as the center, take the quality as the premise, and aim to create the best price Automatic Screw Conveyor Feeder / Powder Flexible Screw Auger Conveyor. We will integrate into the international economic competition with a new attitude and high-spirited pace, and closely follow the footsteps of the world. We take the standard business operation procedure and the extremely competitive price to produce the satisfied product for you.
Hot Tags: flexible screw conveyor, China, manufacturers, suppliers, factory, wholesale, discount, buy, cheap, price, for sale, rpet polyester Large mill, RPET bottles Recovery crusher, Pvc Plastic Stripper, Pure Water Beverage Bottle Stripper, Plastic Crusher Batcher, Portable Conveyor Belts

Inquiry

You Might Also Like