Large volume thin-wall crusher
It is suitable for crushing the waste products of polyethylene, polyvinyl chloride, polypropylene, ABS, nylon and other thermoplastics.The crushed particles can be directly used for injection or extrusion molding.
The waste is manually put into the shell of the crusher from the feed port of the upper fuselage, and then it is continuously cut between the continuously rotating moving blade and fixed blade, and broken into qualified particles which fall into the hopper through the filter.
Two fixed knives are arranged on the rack.Twelve detachable insert blades are mounted on the rotating knife shaft.With blunt can be removed separately sharpening knife, so long blade life.There is a flywheel and belt wheel formed a pair of balance wheel, reduce noise, stable work, strong crushing capacity.
The machine is simple and reasonable in structure, compact, light in weight, small in size, and need not be fixed.
Large volume thin-wall crusher main technical parameters
Diameter of rotating knife: 300mm
Number of rotating knives: 12 /4 sets
Cutter shaft speed: 640r/min
Fixed number of knives: 2
Crushing capacity: 100-300kg/h (according to mesh size)
Mesh hole: 25mm
Feeding port size: 400×240mm
Equipment weight: 650kg
Power supply: three-phase 380V 50HZ