Inclined Flexible Auger Screw Feeding Spiral Conveyor

Inclined Flexible Auger Screw Feeding Spiral Conveyor

Product introduction:
It is suitable for horizontal or inclined transportation of powder, granular and small bulk materials, such as coal mine, ash, slag, cement, grain, etc. The material temperature is less than 200 C. It is not suitable for transporting deteriorating, viscous and caking materials.
Chat Now

Product Details

Our RPET bottles Recovery crusher, Electric Hot Water Pressure Washer, Mute Plastic Crusher is designed and manufactured carefully on the basis of many years of production based on the needs of the majority of customers, integrating the features of products of other brands. We have top engineers in these industries and an efficient team in the research. Adhering to the enterprise spirit of dedication, dedication and innovation, we have achieved rapid development with flexible operation mechanism and continuous independent innovation. Since its foundation, the company keeps living up to the belief of 'honest selling, best quality, people-orientation and benefits' to customers. Our products are wide-ranging, complete in size and in accordance with international and national standards, and can be adapted to different customer working conditions.

1. Product introduction: 

The screw feeder is a new generation product which integrates steady-flow transportation, weighing measurement and quantitative control of powder materials; it is suitable for continuous measurement and proportioning of powder materials in various industrial production environments; it adopts many advanced technologies with reliable operation and high control accuracy; it is especially suitable for continuous measurement and matching of powder materials in building materials, metallurgy, power and chemical industries. Material. Spiral feeder is widely used in various industries, such as building materials, chemical industry, electric power, metallurgy, coal mine carbon, grain and other industries. It is suitable for horizontal or inclined transportation of powder, granular and small bulk materials, such as coal mine, ash, slag, cement, grain, etc. The material temperature is less than 200 C. It is not suitable for transporting deteriorating, viscous and caking materials.


2. Working Principle: 

The screw feeder detects the weight of the material passing through the weighing bridge to determine the weight of the material on the tape. The digital speed sensor installed at the tail of the screw feeder continuously measures the speed of the feeder. The pulse output of the speed sensor is proportional to the speed of the feeder, and the speed signal and the weight signal are sent to the feeder controller together. The processor processes and generates and displays cumulative/instantaneous traffic. The flow rate is compared with the set flow rate. The output signal of the control instrument controls the frequency converter to change the driving speed of the feeder, so that the flow rate of the material on the feeder changes, approaching and maintaining the set flow rate, thus realizing the requirement of quantitative feeding.


3. Use and maintenance:

If the feeder is used for proportioning and quantitative feeding, in order to ensure the uniformity and stability of feeding and prevent material flow, it should be installed horizontally. If the general material is continuously fed, it can be installed at a downward slope of 10 degrees. For viscous materials and materials with high moisture content, the installation can be tilted down by 15 degrees.

B. After installation, the feeder should have 20 mm moving clearance, horizontal and flexible connection for suspension device.

C. Before aerial test, all bolts should be strengthened once, especially the vibration electromagnetic anchor bolts. They should run continuously for 3-5 hours and be re-tightened once.

D. During the test run, the two vibration motors must be rotated.

E. When feeding, the stability of amplitude, current and noise should be checked regularly during operation, and the abnormal should be stopped in time to deal with.

F. Lubricating oil should be added once every 2 months for AMB, and once a month for high temperature season.

Through reasonable technical research and sound production process control security system, our company strictly controls every link, tries its best to provide cost-effective Inclined Flexible Auger Screw Feeding Spiral Conveyor to clients under the quality aim of pursuing quality zero defect. We need to establish a sound incentive mechanism to provide motivation for the long-term development of the company. We promote the development of our company and even the whole industry with our own practical actions.
Hot Tags: flexible screw conveyor, China, manufacturers, suppliers, factory, wholesale, discount, buy, cheap, price, for sale, PET Bottle Strip Stripper, Waste Plastic Pet Bottle Label Stripper, Recycled PET material Blue machinery, Types Of Screw Conveyor, Vertical Screw Conveyor, Small Waste Film Crusher

Inquiry

You Might Also Like