Industrial Pipe Auger Spiral Flexible Screw Elevator Conveyor

Industrial Pipe Auger Spiral Flexible Screw Elevator Conveyor

Product introduction:
It is suitable for horizontal or inclined transportation of powder, granular and small bulk materials, such as coal mine, ash, slag, cement, grain, etc. The material temperature is less than 200 C. It is not suitable for transporting deteriorating, viscous and caking materials.
Chat Now

Product Details

With state-of-the-art technologies and facilities, strict good quality regulate, reasonable cost, exceptional assistance and close co-operation with prospects, we're devoted to supplying the top benefit for Plastic Scrap Crusher, Pet Plastic Bottle Peeling Machine, Small Hot Water Pressure Washer. We glance forward to receiving your enquires shortly and hope to have the opportunity to function along with you inside the future. Our company is an honest and trustworthy enterprise, and has won the recognition and support of employees, suppliers and customers. In recent years, we have achieved rapid development and continue to promote product upgrades, and our products are well received by customers all over the world. In order to accelerate the rapid development of our company, wewill advance with the times and carry forward the spirit of enterprise and business philosophy, and provide you with premium products and services. Under the business philosophy of taking technological innovation as the guide, relying on talents, and market demand as the carrier, we innovate technology and improve services.

1. Product introduction: 

The screw feeder is a new generation product which integrates steady-flow transportation, weighing measurement and quantitative control of powder materials; it is suitable for continuous measurement and proportioning of powder materials in various industrial production environments; it adopts many advanced technologies with reliable operation and high control accuracy; it is especially suitable for continuous measurement and matching of powder materials in building materials, metallurgy, power and chemical industries. Material. Spiral feeder is widely used in various industries, such as building materials, chemical industry, electric power, metallurgy, coal mine carbon, grain and other industries. It is suitable for horizontal or inclined transportation of powder, granular and small bulk materials, such as coal mine, ash, slag, cement, grain, etc. The material temperature is less than 200 C. It is not suitable for transporting deteriorating, viscous and caking materials.


2. Working Principle: 

The screw feeder detects the weight of the material passing through the weighing bridge to determine the weight of the material on the tape. The digital speed sensor installed at the tail of the screw feeder continuously measures the speed of the feeder. The pulse output of the speed sensor is proportional to the speed of the feeder, and the speed signal and the weight signal are sent to the feeder controller together. The processor processes and generates and displays cumulative/instantaneous traffic. The flow rate is compared with the set flow rate. The output signal of the control instrument controls the frequency converter to change the driving speed of the feeder, so that the flow rate of the material on the feeder changes, approaching and maintaining the set flow rate, thus realizing the requirement of quantitative feeding.


3. Use and maintenance:

If the feeder is used for proportioning and quantitative feeding, in order to ensure the uniformity and stability of feeding and prevent material flow, it should be installed horizontally. If the general material is continuously fed, it can be installed at a downward slope of 10 degrees. For viscous materials and materials with high moisture content, the installation can be tilted down by 15 degrees.

B. After installation, the feeder should have 20 mm moving clearance, horizontal and flexible connection for suspension device.

C. Before aerial test, all bolts should be strengthened once, especially the vibration electromagnetic anchor bolts. They should run continuously for 3-5 hours and be re-tightened once.

D. During the test run, the two vibration motors must be rotated.

E. When feeding, the stability of amplitude, current and noise should be checked regularly during operation, and the abnormal should be stopped in time to deal with.

F. Lubricating oil should be added once every 2 months for AMB, and once a month for high temperature season.

In order to give you convenience and enlarge our business, we also have inspectors in QC Team and assure you our best service and product for Industrial Pipe Auger Spiral Flexible Screw Elevator Conveyor. We have humanized management and efficient production line. We have established good cooperative relations with our raw material suppliers.
Hot Tags: flexible screw conveyor, China, manufacturers, suppliers, factory, wholesale, discount, buy, cheap, price, for sale, Machine Side Medium Speed Mill, Large Claw Knife Crusher, Small Auger Conveyor, Automatic Stripper Crushing Cleaner, Industrial Screw Conveyors, Pet Bottle Label Remover

Inquiry

You Might Also Like