PE250 X 400/400X600 Small Diesel Engine Mining Stone Jaw Crusher

PE250 X 400/400X600 Small Diesel Engine Mining Stone Jaw Crusher

E-type gravel crusher is a kind of gravel crusher. The motor drives the belt and pulley to move the jaw up and down through the eccentric axis. When the jaw moves up, the angle between the elbow plate and the jaw becomes larger, thus pushing the jaw plate closer to the fixed jaw plate. At the same time, the material is crushed or split to achieve the purpose of crushing.
Chat Now

Product Details

Our Pet bottles are recycled into fibers, Hot Washer, New Plastic Shredder is stable in production and occupy the market with quality, which brings good economic and social benefits to the company. Enterprises of 'quality of survival, the credibility of development' for the purpose, sincerely welcome domestic and foreign businessmen to visit to discuss cooperation. We have now designed a reputable track record among many shoppers.

1.Product introduction: 

E-type gravel crusher is a kind of gravel crusher. The motor drives the belt and pulley to move the jaw up and down through the eccentric axis. When the jaw moves up, the angle between the elbow plate and the jaw becomes larger, thus pushing the jaw plate closer to the fixed jaw plate. At the same time, the material is crushed or split to achieve the purpose of crushing. Crusher crushing mode is curved extrusion type. When moving hull goes down, the angle between elbow plate and moving hull decreases. Under the action of pull rod and spring, the moving hull plate leaves the fixed hull plate. At this time, the crushed material is discharged from the lower outlet of the crushing chamber. The crusher periodically crushes and discharges materials with the continuous rotation of the motor.


2. Product uses: 

1. This series of crushers are mainly used in metallurgy, mining, chemical industry, cement, construction, refractories and ceramics and other industrial sectors to crush and fine various hard ores and rocks.2. The series crushers are most suitable for crushing soft and hard ores with compressive strength not higher than 300 Mpa (Mpa), and the maximum size of crushed materials should not be greater than that specified in the technical parameter table.


3.Maintenance and use

1. The crusher can not start feeding until it is in normal motion.

2. The material to be broken should be evenly added into the crusher chamber, and side feeding should be avoided to prevent sudden load change or unilateral sudden increase.

3. Under normal conditions, the temperature rise of bearings should not exceed 358C, and the maximum temperature rise should not exceed 708C. If it exceeds 708C, stop immediately and find out the reason to eliminate it.

4. Before stopping, the feeding should be stopped first, and the motor can be closed only after the crushed material is discharged completely from the crushing chamber.

5. When in use, if stopping is caused by material blockage in the crushing chamber, the motor should be shut down immediately, and the material must be eliminated before restarting.

6. The head can be adjusted after one end of the jaw plate is worn out.


Lubrication

1. Frequent attention and timely lubrication of the friction surface can ensure the normal operation of the machine and prolong its service life.

2. Calcium-based grease is generally used in this machine. Users can also choose other types of grease according to the location and temperature of the machine, but it is necessary to ensure good lubrication of bearings.

3. The grease added into the bearing seat is 50%-70% of its volume. It must be replaced every three months. Clean gasoline or kerosene should be used to carefully clean the slideway of roller and bearing when changing oil.

4. Grease must be injected into the contact area between the elbow plate and the elbow pad before the machine starts.


4.Product pictures:

image001

Our firm aims to operating faithfully, serving to all of our consumers, and working in new technology and new machine continually for PE250 X 400/400X600 Small Diesel Engine Mining Stone Jaw Crusher. We always adhere to the customer first service concept. With a complete sales service system throughout the entire process of pre-sales, re-sales and after-sales, we try our best to provide customers with considerate services. We warmly welcome friends from all walks of life to visit and negotiate. Establishing a corporate culture consistent with corporate vision and values ​​is the basis for promoting the sound development of corporate work.
Hot Tags: small jaw crusher, China, manufacturers, suppliers, factory, wholesale, discount, buy, cheap, price, for sale, Pet Bottle Label Remover, Intralox Conveyor, Automatic Quick Stripper, Burn Resistant Conveyor Belt, High Strength Plastic Shredder, Clean Equipment Paper Stripper

Inquiry

You Might Also Like