Small Jaw Crusher PE150*250 for Laboratory Usage

Small Jaw Crusher PE150*250 for Laboratory Usage

E-type gravel crusher is a kind of gravel crusher. The motor drives the belt and pulley to move the jaw up and down through the eccentric axis. When the jaw moves up, the angle between the elbow plate and the jaw becomes larger, thus pushing the jaw plate closer to the fixed jaw plate. At the same time, the material is crushed or split to achieve the purpose of crushing.
Chat Now

Product Details

We innovate and perfect the quality of our PET Flakes High efficiency, PVC Green Fender Conveyor Belt, Tube Crusher, always emphasize innovation and outperform ourselves. We have a complete quality control system, advanced design philosophy, strict management of manufacture process. Thanks to this, it is possible to make our product quality stable and reliable. Over the years, our company has always adhered to the principle of valuing contracts and keeping faith, and has been unanimously recognized by the whole industry and customers.

1.Product introduction: 

E-type gravel crusher is a kind of gravel crusher. The motor drives the belt and pulley to move the jaw up and down through the eccentric axis. When the jaw moves up, the angle between the elbow plate and the jaw becomes larger, thus pushing the jaw plate closer to the fixed jaw plate. At the same time, the material is crushed or split to achieve the purpose of crushing. Crusher crushing mode is curved extrusion type. When moving hull goes down, the angle between elbow plate and moving hull decreases. Under the action of pull rod and spring, the moving hull plate leaves the fixed hull plate. At this time, the crushed material is discharged from the lower outlet of the crushing chamber. The crusher periodically crushes and discharges materials with the continuous rotation of the motor.


2. Product uses: 

1. This series of crushers are mainly used in metallurgy, mining, chemical industry, cement, construction, refractories and ceramics and other industrial sectors to crush and fine various hard ores and rocks.2. The series crushers are most suitable for crushing soft and hard ores with compressive strength not higher than 300 Mpa (Mpa), and the maximum size of crushed materials should not be greater than that specified in the technical parameter table.


3.Maintenance and use

1. The crusher can not start feeding until it is in normal motion.

2. The material to be broken should be evenly added into the crusher chamber, and side feeding should be avoided to prevent sudden load change or unilateral sudden increase.

3. Under normal conditions, the temperature rise of bearings should not exceed 358C, and the maximum temperature rise should not exceed 708C. If it exceeds 708C, stop immediately and find out the reason to eliminate it.

4. Before stopping, the feeding should be stopped first, and the motor can be closed only after the crushed material is discharged completely from the crushing chamber.

5. When in use, if stopping is caused by material blockage in the crushing chamber, the motor should be shut down immediately, and the material must be eliminated before restarting.

6. The head can be adjusted after one end of the jaw plate is worn out.


Lubrication

1. Frequent attention and timely lubrication of the friction surface can ensure the normal operation of the machine and prolong its service life.

2. Calcium-based grease is generally used in this machine. Users can also choose other types of grease according to the location and temperature of the machine, but it is necessary to ensure good lubrication of bearings.

3. The grease added into the bearing seat is 50%-70% of its volume. It must be replaced every three months. Clean gasoline or kerosene should be used to carefully clean the slideway of roller and bearing when changing oil.

4. Grease must be injected into the contact area between the elbow plate and the elbow pad before the machine starts.


4.Product pictures:

image001

We always keep a large number of stocks to ensure that we can supply enough Small Jaw Crusher PE150*250 for Laboratory Usage for our customers. We hope to take a brand-new management model, perfect technology, considerate service, and high-quality quality as the basis for survival and development. With many years good service and development, we've a professional international trade sales team.
Hot Tags: small jaw crusher, China, manufacturers, suppliers, factory, wholesale, discount, buy, cheap, price, for sale, Dirt Conveyor, Pet recycling company plastic crusher, Small Powerful Particle Crusher, Scrap Plastic Crusher Crusher, Hot Water Power Washer, Post consumer recycled PET

Inquiry

You Might Also Like